Zonex Systems direct digital control auto changeover thermostat is designed to control and modulate a stand alone D-fuser or damper in commercial applications. Designed for over-conditioned areas, the thermostat senses the duct temperature and compares it to the heat/cool setpoints vs. room temperature and modulates the damper for the correct volume of air.

The thermostat includes a duct sensor installed upstream of the damper or D-fuser and sends the duct temperature to the thermostat via 2 thermostat wires. Optional auxiliary heat output available, Part # AXMOD.

• SAMOD thermostat for conference rooms.
• SAMOD for over-conditioned areas.
• SAMOD for tenant improvements - update VAV systems.
• Use with zone dampers or D-Fuser
• Automatic mode changeover based on duct temperature.
• Optional auxiliary heat output available.
• SAMOD displays the room temperature and duct temperature and damper position.

Additional SAMOD Information

Home Consumer Contractor Engineer/Architect Submittals/Specifications

Top