The DigiTract 4 System is Compatible with Most Field Supplied Thermostats

Part #101PROG Programmable Thermostat Manual

Part #DIGICOM (shown) Windows based communicating thermostat.

The Zone Thermostats monitor the room temperature of each zone and compare it to the heat and cool setpoints stored in them. If the room temperature drops below the heat setpoint, the zone thermostat makes a heat call telling the System Controller that zone needs heating. If the room temperature rises above the cool setpoint, that thermostat makes a cool call telling the System Controller that zone needs cooling. Two-stage thermostats are not required with the DigiTract 4 System. The System Controller will cycle staging and auxiliary strip heat based on leaving air temperature.

 

 

 

BACK

Top